EQUIPMENT · CAR LIFTS
Two-Post Car Lift — Clear-Floor, 4,000 kg
The documented clear-floor two-post model: 4,000 kg of capacity and a full published specification.
- 4,000 kgrated lifting capacity
- 1,850 mmmaximum lifting height
- 50–60 slifting time
- 650 kgmachine weight
Clear-floor two-post lift, 4,000 kg
This is the two-post lift VICO publishes with a complete data sheet: a clear-floor design rated at 4,000 kg, lifting to 1,850 mm with a 120 mm minimum height. The pass width between columns is 2,500 mm within a 2,790 mm column width, and the full installation footprint is 3,320 mm wide. The recorded lifting time is 50–60 seconds, on a 2.2 kW motor offered in 380 V or 220 V versions. The data sheet records the machine at 650 kg, with a 24 MPa oil pressure rating.
| Lifting capacity | 4,000 kg |
|---|---|
| Lifting height | 1,850 mm |
| Minimum height | 120 mm |
| Pass width | 2,500 mm |
| Column width | 2,790 mm · total width 3,320 mm |
| Lifting time | 50–60 s |
| Motor | 2.2 kW · 380 V or 220 V |
| Oil pressure rating | 24 MPa |
| Weight | 650 kg |
| Design features | Clear floor · double hydraulic cylinders · 4×4 chain with wire-rope balancing · one-side manual release · rubber-pad door-opening protection · limit switch · two/three-stage swing arms |
The documented clear-floor model
The documented model is the clear-floor design, and its synchronisation is by dual cylinders with chain and wire-rope balancing. The format's dimensions are on the data sheet: columns 2,790 mm wide within a total width of 3,320 mm, a pass width of 2,500 mm and a lowered height of 120 mm.
The model's recorded safety set, as named in its data sheet: a one-side manual release, rubber-pad door-opening protection, and a limit switch. Its recorded design features include two- or three-stage swing arms.
Plate model also available
The documented model's recorded figures, collected again here: 4,000 kg capacity, 1,850 mm lift height, 120 mm minimum height, 2,500 mm pass width, a 50–60 second lifting time, a 24 MPa oil pressure rating and a machine weight of 650 kg. The range also lists a two-post plate-model lift, under that name. Its specification is confirmed on quotation; send your ceiling height, the heaviest vehicle you lift and your voltage, and both two-post variants are specified on quotation. Lifts in the range are supplied from one set, with an average lead time of around 15 days before dispatch. The data sheet also records a total width of 3,320 mm, a column width of 2,790 mm and a 2.2 kW motor in 380 V or 220 V form.
What ceiling height does this lift need?
The model's dimensions are on the data sheet above; state your ceiling height on the enquiry.
Can it lift a long-wheelbase van?
The rated capacity is 4,000 kg, and the data sheet lists two/three-stage swing arms. Send the vehicle details with the enquiry; suitability against the rated capacity is confirmed on quotation.
What is included for installation?
The lift's recorded figures are on the data sheet above — capacity, heights, widths, lifting time, motor and weight. What a given order includes beyond the machine itself is a question for the enquiry: raise it with your ceiling height and floor details, and the position for that model is confirmed on its quotation.
Quote the clear-floor two-post lift
Send the models you are comparing, your workshop size and your destination port. Most machine orders start from a single set, and each model's specification is confirmed on quotation.