EQUIPMENT · DENT REPAIR & WELDING
Spot Welders & Dent Pullers — the Panel Repair Family
Twelve dent pullers and spot welders listed by name — including the aluminium models and the aluminium-and-steel combination unit — plus the MIG welder models listed below.
- 12 modelsof pullers and spot welders
- 7 modelsof CO₂ MIG welders
- 7500+M6aluminium & steel combination unit
- 1 setminimum order on most models
Twelve pullers and spot welders for panel work
The VICO dent repair range lists twelve models: dent pullers, dedicated aluminium pullers, a multifunctional pulling machine with C-type gun, an intelligent spot welder, and a double-side resistance spot welder. Specifications for this family are confirmed on quotation; the models are listed below by name and type.
BAY 06 · DENT REPAIR & WELDING
The tool types in the list
The VDP pulling list
The VDP-series dent pullers are listed in the model list above, alongside the aluminium models named in the next section. Each model's working configuration is confirmed on quotation.
Aluminium pullers
The range lists dedicated aluminium pullers — the VDP-M6/M8 — and the VDP-7500+M6, listed as an aluminium-and-steel combination unit.
Spot welders
The VSW-13000 is listed as a multifunctional resistance double-side spot welder. The VDP-8900 is the range's intelligent spot welder.
The VDP series in the model list above runs up to the 7500 Classic; each model's working configuration is confirmed on quotation.
The CO₂ MIG welder list
Alongside the pulling range, VICO lists seven CO₂ MIG welders: the VMW-270, the VMW-270AL IGBT inverter aluminium model, the digital VMW-315N, the VMW-315S, and the VMW-5250T, VMW-6270T and VMW-6315T units. Specifications are confirmed on quotation; if aluminium welding is part of your work, note it in the enquiry — the VMW-270AL is the range's listed aluminium model.
BAY 06 · DENT REPAIR & WELDING
Dent repair equipment is supplied from one set on most models (small accessories run 10–100 sets), with lead time confirmed on quotation — the range average is around 15 days before dispatch. CE-certified models are available within the wider VICO range; certificates are available upon request.
Can one machine pull both steel and aluminium?
The VDP-7500+M6 is listed as an aluminium-and-steel combination; the VDP-M6/M8 are listed as aluminium models. Each model's configuration is confirmed on quotation.
Do I need a spot welder if I already MIG weld?
They are different tool types, listed in separate sections of the range: the MIG welders and the spot welders. The blog comparison sets out the two types.
Are dent pullers available singly?
Yes — most machines in this family start at one set, so a shop can add a single puller on its own.
Related dent repair pages
Add dent repair capacity to your shop
Send the models you are comparing, your workshop size and your destination port. Most machine orders start from a single set, and each model's specification is confirmed on quotation.