EQUIPMENT · FRAME MACHINES
Truck Frame Machine — VF9000 Heavy-Duty, 12 m
A dedicated heavy-truck straightening machine: an 11.8-metre platform, twenty tonnes of lift and a maximum post tension of 245 kN.
- 11,800 mmplatform length
- 245 kNmaximum post tension
- 20 Tmaximum lift capacity
- 12,000 kgmachine weight
The VF9000 — the heavy-truck frame machine
The VF9000 heavy-truck frame machine is built around an 11,800 mm platform, and the model is recorded for heavy trucks, pickups and vans; it carries a maximum lift capacity of 20 tonnes and a pulling post that delivers 245 kN of tension through a 270° working range. The hydraulic system runs at 70 MPa (10,000 psi) with a 30-tonne cylinder capacity, and the complete machine weighs 12,000 kg.
| Platform length | 11,800 mm |
|---|---|
| Platform width | 2,560 mm |
| Platform height | 600 mm |
| Hydraulic pressure | 70 MPa (10,000 psi) |
| Post maximum tension | 245 kN |
| Post working range | 270° |
| Cylinder capacity | 30 T |
| Maximum lift capacity | 20 T |
| Voltage | 3-phase 380 V / 415 V / 220 V |
| Machine weight | 12,000 kg |
| Suitable for | Heavy trucks, pickups and vans |
| Custom orders | OEM arrangements available for special inquiries on this bench |
The VF9000's figures, restated
The VF9000's recorded figures, restated: a platform approaching twelve metres, twenty tonnes of maximum lift capacity, and 245 kN of post tension. The post's working range is recorded at 270°, and the machine itself is recorded at 12,000 kg on a platform 2,560 mm wide and 600 mm high.
The published table for the model is reproduced in the specification section above. The VF9000 is the dedicated machine in this range for that work. Its published table records the platform at 11,800 × 2,560 × 600 mm, hydraulic pressure at 70 MPa (10,000 psi), cylinder capacity at 30 T, and three-phase voltage in 380 V, 415 V and 220 V forms. Its platform width is recorded at 2,560 mm and its platform height at 600 mm, as the specification table above records. Machines across the range are tested prior to delivery, as the company's published service record states.
Ordering terms
The VF9000 is supplied as a single machine — minimum order one set — with lead time confirmed on the project quotation; it is part of the frame machine range for which CE-certified models are available, with certificates available upon request. It is one of the fifteen models in the VF series, as the frame machine page lists them, and the model is recorded with OEM arrangements available for special inquiries. Power is three-phase, in 380 V, 415 V or 220 V form. At enquiry stage, send the largest vehicles you handle, your floor and foundation conditions and your power supply with the enquiry. For car work, the VF series also lists car benches, each specified on its own page.
What vehicles can the VF9000 take?
Heavy trucks, pickups and vans, on an 11,800 mm platform with a 20-tonne maximum lift capacity. Send your largest vehicle's wheelbase and weight for confirmation.
How much pull force does the post deliver?
245 kN maximum tension, through a 270° working range, from a hydraulic system rated at 70 MPa with a 30-tonne cylinder.
Can the bench be customised?
Yes — the model is offered with OEM arrangements for special inquiries. Raise your requirement at enquiry stage.
Plan a truck frame machine installation
Send the models you are comparing, your workshop size and your destination port. Most machine orders start from a single set, and each model's specification is confirmed on quotation.